This picture shows the additional over-sized bar mounts included, converting this model from standard diameter bars to over-sized bars. The bars themselves are not included. You can order bars here, from the pull down menu above, if you don't have oversize already. This kit locates the bars 3mm forward of the stock position and is designed for use with the stock triple clamps only. The bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This Top Mount kit typically will include:- a Stabilizer, - link arm, handlebar clamp, - frame bracket, - step by step pictured instructions, - owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.