This model requires handlebars with a higher cross bar in order to clear the stabilizer. A minimum clearance of 40mm between the main bar and crossbar is needed. As an option, Overland can offer you bowed x-bar handlebar to fit on this stabilizer Kit *** THIS KIT DOES NOT FIT WITH AN IMS TANK.The bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include:- a Stabilizer, link arm, - handlebar clamp, - frame bracket, - step by step pictured instructions, - owners manual and applicable hardware. Some models may require replacement handlebars. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.